Oxva VPrime Dual Mesh

The OXVA VPrime Dual Mesh Replacement Pod Cartridges offer a true sub-ohm tank power to a compact pod system. Designed for the 60W OXVA VPrime Pod Kit, these cartridges feature a combination of two mesh heating systems for dense cloud volume, fast heating rate and a deep flavor extraction for all adult vapers in the UK.

VPrime cartridges are available in convenient 2-pack cartridges and have integrated coils eliminating the hassle of messy, manual coil changing. The VPrime pods have a clean, easy top fill system and powerful magnetic base contacts that give you a seamless shift between high-VG clouds from direct-to-lung (DTL) and 50/50 nicotine salt draw, without leakage, spit, or dry burn.

Why Choose OXVA VPrime Dual Mesh Replacement Pods?

• Twin Mesh Coil Performance: A pair of parallel mesh grills fire at the same time, increasing the vaporization surface area to release the body, sweetness, cooling and cloudiness of the mist.
• True Sub-Ohm Cloud Production: The 0.2-ohm model supports up to 60W of power, making sub-ohm cloud volume accessible for pockets.
• Quick 2ml top fill makes it easy to refill the reservoir without taking the pod cartridge out of the battery device.
• Multi-Layer Leak Prevention: Advanced condensation collection chambers and built-in silicone gaskets prevent e-liquid from leaking out of the pod.
• Even Thermal Distribution: Dual mesh grid evenly distributes thermal load, avoiding a burn out of the wick, and prolonging the life of the cartridge.

Key Features of OXVA VPrime 60W Cartridges

• Completely meets UK TPD and TRPR guidelines with a 2.0ml capacity e-liquid.
• Dual resistance in 0.2-ohm, 0.4-ohm and 0.6-ohm
• Silicone top fill port with easy access for mess free refilling!
• Secure, rattle-free seating with high strength magnetic base contacts.
• An ergonomic wide bore mouthpiece designed for easy and efficient flow of DTL/RTL.
• Clear, food-grade 360 degree pod construction for food-grade e-liquid monitoring.
• 70%/30% shortfill and 50/50 nic salts appropriate high-wicking cotton components.

OXVA VPrime Dual Mesh Pod Resistance Guide

Innovative Dual Mesh Coil Atomization & Anti-Leak Engineering

The internal dual mesh heating core is OXVA's biggest selling point for the OXVA VPrime cartridge. The dual mesh configuration spreads electrical current over two parallel heating surfaces as opposed to the standard single wire coil heaters that heat from a single focal point. This removes hot spots, cleansly removes the complex flavor profiles of desserts, fruits and beverages, and prevents the unwanted caramelization of sweeteners.

Each pod consists of a condensation collection chamber in a labyrinth-like design that gets incorporated into the base of the pod. This design forces excess vapor and moisture to return to the wicking ports, ensuring that the liquid does not pass through the bottom air intake slots and dry and clean the VPrime device's internal connection pins.

How to Fill and Prime Your OXVA VPrime Pod Cartridges

1. Unseal the OXVA VPrime pod.
2. Step 2: Remove protective clear film from magnetic base contacts.
3. 3. Remove silicone top-fill stopper from the upper part of the cartridge.
4. 4. Slide e-liquid bottle nozzle into the vaporizer and add up to 2ml of e-liquid to the reservoir.
5. 5. Push the silicone stopper hard and tight into place to make an air tight seal.
6. 6. IMPORTANT: Give the pod 5-10 minutes to stand upright before it is used to ensure the dry organic cotton wick can soak up the e-liquid at the same time.
7. 8. Place the battery cartridge in the upper cartridge slot of your OXVA VPrime battery device and select your wattage within the recommended range.

Recommended E-Liquid Pairing for OXVA VPrime Pods

• High-VG shortfill e-liquids (usually 70% VG / 30% PG) and low nicotine (0mg to 6mg) work best with Ohm & 0.4 Ohm Pods to give you the best clouds and sub-ohm results possible.
• For 0.6 Ohm Pods: Combine with balanced 50/50 nicotine salts 0.6 Ohm eLiquid with 50/50 VG / PG or 50/50 freebase nicotine 0.6 Ohm eLiquid to achieve a smooth, flavorful mouth-to-lung or limited direct-lung experience (5mg to 20mg).

Storage, Care and Maintenance Guidelines

Keep extra pods in a cool, dry location out of direct sunlight and other environmental heat sources. Always store all pod cartridges, devices and e-liquids out of the reach of children and domestic animals. If a new cartridge is to be inserted, check the base contacts before doing so and use a dry cloth or tissue to remove any light condensation that may have formed to ensure a continuous electrical connection. Recycle suitably any pods that are no longer fit for use, according to local recycling guidelines.

UK TPD Compliance, Genuine Stock & Fast UK Delivery

The OXVA VPrime Dual Mesh Replacement Pod Cartridges meet all of the requirements of the UK Tobacco and Related Products Regulations 2016 (TRPR) and are notified under the Medicines and Healthcare products Regulatory Agency (MHRA). Every batch ordered from VapePlay is 100% genuine OXVA stock with verifiable security scratch codes on every retail pack and shipped from our UK logistics centre, using fast tracked shipping methods.

Age Restriction Notice

Adult smokers and current vapers only (18 years and over). This product is not filled with nicotine and is meant to be filled with e-liquids containing nicotine. Nicotine is a highly addictive drug. Store all pod cartridges, devices and e-liquids in a safe place, away from children and domestic animals.