Hayati Quokka Pro

The Hayati Quokka Pro is a refillable pod device, driven by a 1100mAh internal battery and sets the output between 5W and 25W. It can sustain mesh coils and its e-liquid refill is via side fill. The fire button can be used to turn the vaping on and the airflow can be adjusted by a slider to allow the user to adjust the draw between tighter MTL (mouth-to-lung) and looser RDL (restricted direct-lung) draw. The puff count (number of draws you are going to get per charge or coil) is one of the specifications which has not been reliably recorded. According to actual-life stories, it can be used with 150 and above watts with heavy usage, giving 300 or more puffs in a day, and can be used moderately during the day on Eco or mid mode.

E-liquid properties

The Hayati Quokka Pro takes refillable pods with a 2 mL e-liquid capacity, and so is compatible with most of the vaping laws in regions.The manufacturer recommends nicotine salt e-liquids in such strengths as 5mg, 10mg or 20mg depending on the number of cigarettes a person used to smoke, and can also take 50/50 freebase at lower levels such as 3mg or 6mg. This customisability enables the user to adjust the nicotine consumption to his or his smoking pattern and also to customise the throat hit, smoothness and flavour preferences.

Design features

Hayati Quokka Pro has a very fine finish made of a unibody made of zinc-alloy and baked-paint, which gives it a high-quality and durable touch and prevents fingerprints or wear. Its most remarkable visual element is a u-shaped interactive light system, which changes colors to indicate mode and battery status, with the assistance of 1.47 inches TFT display to show settings, puff count, and battery information. To be customized, it has a three-button interface (home, up/down) and an adjustable airflow slider, which allows a user to optimize draw resistance. The pods are magnetized and side-filled to minimize leaks, and are compatible with a variety of Quokka pods (0.6 - 1.2 -0.8) to enable vaping in both MTL and restricted-DL styles.

TPD compliance

The Hayati Quokka Pro Vape Kit meets all the TPD requirements and is, therefore, legally acceptable to sell and use in the European Union and the UK markets. It has a 2mL e-liquid capacity, which complies with TPD laws that restrict the size of tanks to reduce nicotine consumption. The packaging of the product contains mandatory health warnings, child-resistance designs, and tamper-evident seals complying with the regulatory safety standards. Being a refillable and reusable product, it has a compliant alternative to prefilleds but still follows all the labeling and product notification provisions in the framework of TPD. 

How to use Hayati Quokka Pro

To use Hayati Quokka Pro, follow the following simple steps.

• Charge the Device: Connect the device to a USB-C charger using the included cable. Fully charge before first use (indicator light or screen will show when it's ready).
• Insert the Pod: Remove the pod from its packaging and push it into the top of the device - it should snap in magnetically.
• Fill the Pod: Locate the side-fill port on the pod. Lift the rubber seal and fill with your preferred e-liquid (max 2 mL). Close the seal securely to prevent leaks.
• Let the Coil Soak (Priming): After filling, let the pod sit upright for 5-10 minutes to allow the coil to absorb the e-liquid fully. This helps prevent dry hits.
• Turn On the Device: Press the main fire button five times quickly to power the device on or off.
• Adjust Settings (Optional): Use the up/down buttons to adjust the wattage (5W-25W range), and monitor info on the display. You can also slide the airflow control to your desired resistance - tighter for MTL, looser for RDL.
• Vape: Press and hold the fire button while inhaling through the mouthpiece. The screen and LED ring will light up during use.
• Refill When Needed: Refill the pod when e-liquid gets low, and replace the pod or coil when flavor fades or vapor production drops.

Hayati Quokka Pro colours