Geekvape Aegis Force Kit

If you work on building sites, spend weekends outdoors, or just have a habit of dropping your vape onto tarmac, the Geekvape Aegis Force Kit was built for you. It takes everything people trust about the rugged Aegis lineup—certified IP68 water, dust, and shock resistance—and packs it into an ergonomic pod mod pushing up to 60W. At £31.99 (or £89.00 for three at VapePlay), it gives you proper sub-ohm cloud production and clean flavour without the bulk of a dual-battery box mod.

Geekvape solved the biggest headache in pod vaping here: leaking. By feeding air through the top rather than the base, condensation has nowhere to escape, keeping your hands and pockets completely dry. Backed by an internal rechargeable battery, fast 2A USB-C charging, and the beloved mechanical A-Lock slider, the Aegis Force is ready for heavy everyday use.

Geekvape Aegis Force Kit Highlights

• Genuine IP68 Tri-Proof Rating: Fully sealed against fine dust, waterproof against accidental dunks, and built to survive hard concrete drops.
• 5W to 60W Power Range: Plenty of headroom for thick, warm clouds or slightly cooler restricted draws.
• Top-to-Bottom Leakproof Airflow: Air enters through adjustable dual top slots and travels down across the mesh coil, preventing base leaks.
• Physical A-Lock Switch: Slide the toggle to instantly lock the buttons—no burnt cotton from accidental pocket firing.
• Crisp 0.96-Inch TFT Screen: Clean colour display showing wattage, resistance, voltage, and your puff count at a glance.
• Top-Fill 2ml Cartridge: Quick-access silicone port lets you top up e-liquid without pulling the pod out of the device.
• High-Speed Type-C Charging: 2A input gets you back to full charge quickly when you are running low.

Built to Take a Beating: IP68 Protection

Most pod kits crack or die the second they hit concrete or get caught in a downpour. The Aegis Force uses a tough zinc-alloy skeleton wrapped in impact-absorbing silicone bumpers and padded leather. Whether it gets knocked off a scaffold, dropped in a puddle, or covered in sawdust, you can simply rinse it under the tap, dry it off, and keep vaping.

All-Day Power & 2A USB-C Quick Charging

The internal battery delivers steady, regulated voltage from full charge right down to empty, so your hits do not feel weak or muted when the battery bar dips. When you finally need to plug in, the sealed Type-C port supports 2A fast charging, getting you through a top-up in the time it takes to have lunch.

Why Top Airflow Matters

Bottom-airflow pods leak eventually—it is just the nature of heat and condensation settling at the base of a coil. Geekvape routes incoming air from the top of the pod down through internal side channels and up through the centre of the mesh coil. The result is zero messy seepage on your battery contacts and a noticeably smoother, quieter inhale.

The A-Lock Switch: No More Burnt Coils

Clicking a fire button five times every time you slip your vape into a pocket gets old fast. The physical A-Lock slider on the side locks the fire button and adjustment keys with one flick. When you want a vape, flick it back up and hit it. It completely eliminates accidental pocket firing and ruined coils.

Available Colour Options

The Aegis Force blends brushed gunmetal and matte alloy finishes with premium stitched leather grip panels:

Pricing: £31.99 per kit. Multi-buy discount: grab any 3 for £89.00 (£29.66 each).

How the Aegis Force Compares

Who Is It For?

• Tradespeople & Outdoor Workers: Dust, water, and drops won't kill it. It handles life on a building site or out in the rain without skipping a beat.
• Sub-Ohm Flavour Chasers: If you want the cloud and warmth of a sub-ohm tank without carrying a bulky glass setup, the mesh coil wicking here delivers.
• Commuters Who Hate Leaks: Top-airflow engineering means your pocket stays dry during your commute.
• Skip this kit if: You only want a tiny, featherweight mouth-to-lung vape for 20mg nic salts. A slim pen like the Geekvape Wenax or Sonder will suit your pocket much better.

First-Time Setup Guide

1. Take the device, pod, and mesh coils out of the packaging.
2. Grab your coil and put 3–4 drops of e-liquid directly onto the exposed cotton wick windows to pre-saturate it.
3. Push the primed coil firmly into the base of the pod cartridge until it sits completely flush.
4. Open the silicone fill tab at the top of the pod, fill it roughly 80–90% full with your chosen e-liquid, and close the plug.
5. Snap the pod into the battery mod. Wait 5 to 10 minutes before your first draw so the cotton can soak through—do not skip this step or you will scorch the wick.
6. Slide the A-Lock switch up to unlock the controls, click the fire button 5 times to turn it on, and you are ready to vape.

What’s in the Box?

• 1 x Geekvape Aegis Force Device Body
• 1 x Refillable Aegis Force 2ml Pod Cartridge
• 1 x Pre-installed Geekvape Mesh Sub-Ohm Coil
• 1 x Spare Geekvape Mesh Coil
• 1 x Coil Removal Tool
• 1 x USB Type-C Charging Cable
• 1 x User Manual & Warranty Information

Quick Troubleshooting

• Burnt taste right away? The cotton was not fully saturated. Always let a brand-new coil rest in liquid for 5–10 minutes before firing.
• Device won't fire? Check the physical A-Lock switch on the side. If it is in the down position, the buttons are locked. Slide it up to unlock.
• Airflow feels too tight? Twist the top airflow ring on the pod to open the dual slots wider.
• Weak vapour? Check your battery level on the TFT screen or bump up the wattage slightly within the rated limits printed on your coil.

Order at VapePlay UK

All hardware sold at VapePlay is 100% genuine and fully TPD compliant for the UK market. Place your order before 4:00 PM Monday to Friday for same-day dispatch and fast, tracked delivery across the UK.

Warning: This hardware kit is designed for use with e-liquids that may contain nicotine. Nicotine is an addictive substance. Intended strictly for adult smokers and vapers aged 18 and over. Keep out of reach of children and pets.