Geekvape Aegis Force Pods

The Geekvape Aegis Force Empty Replacement Pods are genuine 2ml refillable cartridges engineered exclusively for the Geekvape Aegis Force 80W Pod Kit. Supplied in a convenient 2-pack without pre-installed coils, these empty pods give adult vapers across the UK the freedom to pair their device with the entire Geekvape B Series coil range—delivering seamless versatility from dense Direct-to-Lung (DTL) sub-ohm clouds to a crisp Mouth-to-Lung (MTL) draw.

Built with Geekvape’s signature top-to-bottom leakproof airflow architecture, each Aegis Force pod routes incoming air above the e-liquid reservoir to eliminate bottom-slot seepage and keep your device's magnetic connection pins clean and dry. With both wide-bore DTL and narrow MTL drip tips included in the box, switching your vaping style takes seconds.

Why Choose Geekvape Aegis Force Empty Replacement Pods?

• Full Geekvape B Series Coil Compatibility: Supports all seven Geekvape B Series press-fit mesh coils (0.15? to 1.2?), letting you tailor wattage, warmth, and vapour output to your exact preference.
• Top-to-Bottom Leakproof Airflow: Top-mounted adjustable airflow channels draw air down through the coil, preventing e-liquid condensation from escaping through the base.
• True MTL, RDTL & DTL Versatility: Includes pre-installed DTL drip tips plus a spare MTL drip tip so you can match the mouthpiece bore to your chosen coil resistance.
• Cost-Effective Empty Pod Design: Swap worn-out B Series coils using the quick press-fit base slot without throwing away the entire cartridge.
• Multi-Pod Flavour Rotation: Keep two pods loaded with different e-liquid flavours or nicotine strengths for instant magnetic swapping throughout the day.

Key Features of Geekvape Aegis Force 2ml Pod Cartridges

• 100% UK TPD and TRPR compliant 2.0ml e-liquid capacity.
• Supplied as a value 2-pack of empty refillable cartridges (coils sold separately).
• Exclusively engineered for the Geekvape Aegis Force Pod Mod Kit.
• Precision adjustable top airflow control ring for fine-tuning draw resistance.
• Mess-free silicone fill port plug with secure, leak-resistant sealing.
• One-way press-fit coil installation for fast, tool-free coil changes.
• High-strength magnetic base connection for a wobble-free fit.
• Crystal-clear PCTG pod housing for at-a-glance e-liquid level monitoring.

Geekvape B Series Coil Compatibility & Resistance Guide

Top-to-Bottom Leakproof Airflow & Dual Drip Tip Design

Unlike traditional bottom-airflow pods that rely solely on O-rings to hold e-liquid back against gravity, the Geekvape Aegis Force replacement pod places its adjustable airflow intake ring at the top of the cartridge. Incoming air travels downward through internal side channels and passes cleanly up through the centre of the B Series mesh coil, delivering a smoother, quieter inhale while keeping battery terminals dry.

To make full use of the broad B Series coil lineup, Geekvape includes both wide-bore DTL drip tips and a narrow MTL drip tip in every pack. Pairing the wide drip tip with sub-ohm coils (0.15?–0.4?) maximizes airflow for dense clouds, while swapping to the narrow MTL tip with higher-resistance coils (0.6?–1.2?) concentrates flavour and tightens the draw.

How to Install a Coil and Fill Your Geekvape Aegis Force Pod

1. Remove the empty Geekvape Aegis Force pod from its packaging and choose your preferred Geekvape B Series coil.
2. Align the flat edges on the base of the B Series coil with the slots inside the bottom of the pod and push firmly until it sits flush.
3. Fit your preferred mouthpiece—use the pre-installed wide-bore drip tip for DTL vaping or swap to the included narrow drip tip for MTL vaping.
4. Lift the silicone fill port plug on the pod to expose the filling slot.
5. Insert your e-liquid bottle nozzle and fill the reservoir up to its 2.0ml capacity, avoiding overfilling.
6. Press the silicone stopper firmly back into place to create an airtight seal.
7. IMPORTANT: Allow the filled pod to stand upright for 5–10 minutes before vaping so the organic cotton wick saturates completely and prevents dry hits.

Recommended E-Liquid Pairing for Geekvape Aegis Force Pods

• Sub-Ohm DTL Coils (0.15?, 0.2? & 0.3?): Pair with 70% VG / 30% PG high-VG shortfill e-liquids (0mg to 6mg nicotine) for thick vapour clouds and optimal wicking at higher wattages.
• Mid-Range RDTL Coils (0.4? & 0.6?): Compatible with both 70/30 shortfills and balanced 50% VG / 50% PG freebase or lower-strength nicotine salts for a flexible restricted direct-lung draw.
• High-Resistance MTL Coils (0.8? & 1.2?): Pair with 50/50 nicotine salt e-liquids or high-PG freebase liquids (10mg to 20mg) for a smooth throat hit and discrete vapour production.

Box Contents

• 2 × Geekvape Aegis Force Empty Replacement Pods (2ml UK TPD)
• 2 × DTL Drip Tips (Pre-installed)
• 1 × Spare MTL Drip Tip
• 1 × User Manual

Storage, Care and Maintenance Guidelines

• Store spare pods in a cool, dry place away from direct sunlight and extreme heat sources.
• Keep all pod cartridges, coils, vaping devices, and e-liquids safely out of the reach of children and pets.
• Periodically wipe the magnetic base of the pod and your Aegis Force device chamber with a dry tissue to clear any light condensation and maintain strong electrical conductivity.
• Dispose of worn-out coils and used plastic cartridges responsibly in accordance with your local UK WEEE and recycling guidelines.

Frequently Asked Questions (FAQ)

Are coils included with the Geekvape Aegis Force Empty Replacement Pods?
No, these are empty replacement cartridges. Coils are sold separately—you can install any coil from the Geekvape B Series range (0.15? to 1.2?).

Will these pods fit the Geekvape Aegis Boost or Aegis Hero?
No. Although they use the same Geekvape B Series coils, the Aegis Force pod housing is shaped exclusively for the Geekvape Aegis Force Pod Kit and will not fit Aegis Boost, Aegis Hero, or Wenax devices.

How often should I replace the empty pod cartridge itself?
Because the coils are replaceable, a single Aegis Force pod shell typically lasts 4 to 8 weeks with regular cleaning. Replace the pod if the silicone fill bung wears loose, the PCTG body cracks, or flavour lingers after washing.

UK TPD Compliance, Genuine Stock & Fast UK Delivery

The Geekvape Aegis Force Empty Replacement Pods fully comply with the UK Tobacco and Related Products Regulations 2016 (TRPR) and are notified with the Medicines and Healthcare products Regulatory Agency (MHRA) at a 2.0ml capacity. Every pack sold by VapePlay is 100% authentic Geekvape hardware featuring a verifiable scratch-and-check security code, dispatched rapidly from our UK warehouse with tracked delivery options.

Age Restriction Notice

For adult smokers and vapers aged 18 and over only. These replacement pods are supplied empty, contain no e-liquid or nicotine, and are intended to be filled with compliant e-liquids. Nicotine is an addictive substance. Always store vaping hardware and e-liquids securely away from children and domestic animals.